Driving habits of people in "LUGGING THE ENGINE" way force the machine to work with low speed below 2000 RPM in gear 3, 4 or even 5 is a very bad habit because it will reduce the lifetime of the machine. Excessive vibration caused the engine will also be a negative impact on other components such as transmission components, drive axles, axle, etc.. For everyday driving, keep the engine speed at
More about → Lugging the engine
Italian tune up
Posted by Unknown
The ITALIAN TUNE-UP term originated from the habit of driving the Italians, famous temper and pleased speeding. In the Italian mountain paths, they are famous with his driving style a la horde heavy legs, just stepped on the gas until the engine turns abis / RPM reaches the maximum limit (redline) before passing gear. Contrary to the perception or myth that adopted by most people, this driving
More about → Italian tune up
{ Add comments }
How to turn on and heats up the carburetor engine
Posted by Unknown
1. Hit the gas pedal to get stuck one time to activate the auto-choke;
2. Off the gas pedal and turn the machine on;
3. The machine will rotate at a slightly higher rotation (depending on outside air temperature) since the auto choke and fast idle at work;
4. After 10 seconds, if the engine speed is still too high, stepped on the gas pedal suddenly by about 1 / 2 steps to disable the fast idle
{ Add comments }
How to turn on automobile and heating EFI MACHINE (Electronic Fuel Injection)
Posted by Unknown
1. Turn the engine with the gas pedal is not stepped on a bit;
2. ECU (Electronic Control Unit) on a machine is still cold. EFI will automatically compensate for engine speed, engine speed where the height depending on outside air temperature. The colder the outside air, the higher the engine speed. So do not step on the gas pedal at all;
3. Engine speed will drop automatically. For the
More about → How to turn on automobile and heating EFI MACHINE (Electronic Fuel
Injection)
2. ECU (Electronic Control Unit) on a machine is still cold. EFI will automatically compensate for engine speed, engine speed where the height depending on outside air temperature. The colder the outside air, the higher the engine speed. So do not step on the gas pedal at all;
3. Engine speed will drop automatically. For the
{ Add comments }
heating auto machines
Posted by Unknown
Basically, a well-maintained modern car machines only require heating in place within a very short time. Heating time at a place only about 10 seconds at temperatures above 20 degrees Celsius. If the air temperature is below that, the heating time may be added in place for about 10 seconds. Warming the engine about 2 s / d 3 minutes only required if the air temperature touching freezing aka 0
{ Add comments }
headlights
Posted by Unknown
high beams
The main lights (headlight) is a vital component in a car or motorcycle, especially when driving at night. The quality of the generated light to illuminate the road affects the reflex response and the driver. Other constraints such as bad weather (heavy rain, thick fog) lowered work ability headlight.
The quality of a headlight illumination influenced several factors, among others
{ Add comments }
autoparts
Posted by Unknown
have you ever finding your chevy auto parts or your wife's nissan auto parts in hard ways? well i guess it isn't anymore. Along with the development of the world in the era of globalization and the rapid growth of developing countries, industry sectors is competing once more, marked by the increasing number of industries that took part in these developments,include the automotive and
{ Add comments }
